Still receiving the old bill type? You're on the right page! If not, choose the correct FAQ.
How can I check the Wi-Fi Bridge cabling for my b-box 3?
Make sure the Internet cable between the telephone socket and the blue DSL port on the modem is properly plugged in.
Figure a: if there is a filter on your telephone socket, plug the supplied black cable with blue end (or the blue cable) into the bottom of the filter.
Figure b: if no filter is supplied, open the small clip with the telephone icon and plug in the black cable with blue end provided (or the blue cable).
- Make sure the power cable between the power socket and the Wi-Fi Bridge is properly plugged in.
- Make sure the power cable between the decoder and the power socket is properly plugged in.
- Make sure the HDMI cable connection between the TV and the decoder is properly plugged in.
- Make sure the Ethernet cable between the Wi-Fi Bridge and the output of the decoder is properly plugged in.
- Turn on the decoder.
- Press and hold the WPS button on your modem for 2 seconds. The WPS LED will start to flash.
- Then, press and hold the WPS button at the front of the Wi-Fi Bridge for 2 seconds.
- Once the Wi-Fi Bridge is synchronized, the Link Quality Wireless and Power LEDs should be on.