There are several visible light indicators on your Wi-Fi Bridge.

Here's what they mean:

Power
The Power indicator shows that your Wi-Fi Bridge is on. If it's off, check if the power cable is correctly connected and if the switch is in the On position.

Link Quality
The Link Quality indicator is only visible if the Wi-Fi Bridge is functioning as a receptor.
. In this case, the light on the indicator indicates the signal quality between the Wi-Fi Bridge and your b-box.

• Green indicator: Signal is excellent.
• Orange indicator: Signal is good.
• Red indicator: Signal is weak. You can resolve this by bringing your Wi-Fi Bridge closer to your b-box.

If the Link Quality indicator is off, you need to resynchronize your devices.

Synchronize your devices:

• Press the WPS button on your b-box for 2 seconds, then press the WPS button on your Wi-Fi Bridge for 2 seconds.
• When both WPS indicators stop blinking, you should see the Link Quality indicator again.

Access Point
This indicator only lights up if the Wi-Fi Bridge is functioning as a signal transmitter.

Wireless
This indicator indicates that a Wi-Fi connection is possible. If the indicator blinks, it means a Wi-Fi connection is in progress.

WPS (Wi-Fi Protected Setup)
This button provides information about the synchronization between your Wi-Fi Bridge and your b-box. It is generally off and should only blink if you initiate synchronization.